Your browser does not seem to support JavaScript. As a result, your viewing experience will be diminished, and you have been placed in read-only mode.
Please download a browser that supports JavaScript, or enable it if it's disabled (i.e. NoScript).
As the subject says, I'd like to change the tint or color of the ship glows (let's say to red)
How would I go about doing this? . . . . And after telling me the best way, what would be another way?
Can it be done in Frotoshop (photoshop)?
------------------ Power corrupts. Absolute power is kind of neat. --John Lehman,US secretary of the navy
You can do it in photoshop, but it'd take a while to get it to look right. You'd need to convert the rlë*s to sprites first too. Mess with levels, and other stuff, and you might be able to get a good red.
------------------ Some call me strange. Some call me weird. Some just call me Normal Guy.
To type out the steps illustrated by Normal Guy:
Copy the Vell-os glow RlëDs into a new ResEdit file, make a spďn resource, making sure the RlëDs are properly being used by the spďn thingies.
Plop the file in DeRle and click "OK."
Take the PICT file into Photoshop and tamper with the color balances (adjust the magenta and red most)
Reverse the steps to put in a plug-in.
Another way would be re-modeling the vell-os ships and make red glows.
------------------ ( (url="http://"http://www.webanimag.com/ayb/")All your smurf are belong to smurf!(/url) )( Generic (url="http://"http://ww.evula.com")EVula(/url) link )( monster! ) Mantaray: Supergenius and idiot rolled into one!
(This message has been edited by Mantaray (edited 08-27-2002).)
Quote
Originally posted by Mantaray: **To type out the steps illustrated by Normal Guy:
**
I'd rather make a try at the photoshop tamper method, rather then re-modeling. The second way implies I actually have the software to do it!
This could tangent into one of those "try BLAH free modelling program, but I'd rather it not go that route. I'll run it past a friend who has a little knowledge in this area (after he stops laughing when I tell him I can't do it my self )
(quote)Originally posted by Vast Deathmaster: **I'd rather make a try at the photoshop tamper method, rather then re-modeling. The second way implies I actually have the software to do it!
This could tangent into one of those "try BLAH free modelling program, but I'd rather it not go that route. I'll run it past a friend who has a little knowledge in this area (after he stops laughing when I tell him I can't do it my self
------------------ !ii!i i!i(url="http://"http://www.evula.com")e(/url)!i!(url="http://"http://www.evula.net")v(/url) ii! (url="http://"http://www.evula.com")u(/url)!!ii(url="http://"http://www.evula.net")l(/url)ii!(url="http://"http://www.evula.com")a(/url) **
This could tangent into one of those "try BLAH free modelling program"......
A disbeliever! You need to get (url="http://"http://www.povray.org/")POV-Ray(/url).
And Mantaray, your signature is missing "evula.org"......... Mwuhuhahahaa.
I'v done this kind of thing alot, a quick way once its a pic is open it in photoshop, choose red, pick a giant paintbrush, switch it to hue effect, and turn the glow to red / pinkish color in a flash. you may also want to try Color burn / dodge effect for the brush.
------------------ Ecky- ecky- ecky- ecky- pikang- zoop- boing- goodem- zoo- owli- zhiv' Now lobbest thou thy keyboard towards thy monitor, who, being naughty in My sight, shall snuff it. Rogue Thoughts: reorganizing for a new season near you.
Originally posted by ArcAngel Counterstrike: **I'v done this kind of thing alot, a quick way once its a pic is open it in photoshop, choose red, pick a giant paintbrush, switch it to hue effect, and turn the glow to red / pinkish color in a flash. you may also want to try Color burn / dodge effect for the brush.
Thanks, this is an easy way of recycling ships. But this only would work on the Vellos (maybe the Polarans). Fortunately I am only working with the Vellos mission
Originally posted by Vast Deathmaster: **Thanks, this is an easy way of recycling ships. But this only would work on the Vellos (maybe the Polarans). Fortunately I am only working with the Vellos mission
You could repaint other Gov. ships this way, but your have to use a small brush and go over specific parts image to image. Like I made a blue marked Auroran Carrier under fed control, without it looking like it was just hued over like a paint outfit.
Originally posted by ArcAngel Counterstrike: **You could repaint other Gov. ships this way, but your have to use a small brush and go over specific parts image to image. Like I made a blue marked Auroran Carrier under fed control, without it looking like it was just hued over like a paint outfit.
the only bad part about that is that you have to edit it 36 times...
------------------ And it was written that no hand but his should wield the Sword held in the Stone, but he did draw it out, like fire in his hand, and his glory did burn the world. Thus did it begin. Thus do we sing his Rebirth. Thus do we sing the beginning. -from Do'in Toldara te, Songs of the Last Age , Quarto Nine: The Legend of the Dragon. Composed by Boanne, Songmistress at Taralan, the Fourth Age
Originally posted by Lumpy the Elf: **the only bad part about that is that you have to edit it 36 times...
...or more, because some of the bigger ships have more than 36 frames per rotation.
------------------ "The day microsoft makes something that doesn't suck will be the day they make vacuum cleaners." -White Lightning
And ARG!! The color change of each of those sprites would be different as the glow increases and decreases.
I am definitely not going to worry about this until I have everything else done.
Ah. Following what Normal Guy said, I went into photoshop and messed with Hue/Saturation: Dart Base.................................................Dart Glow http://www.angelfire...es/Dart.jpg.txt http://www.angelfire...artglow.jpg.txt
Stick these two (with the unaltered shän for the vell-os dart, and the proper masks, making sure the ID numbers are how they should be) into a new file and run EnRLE. Open up the shän and take a look with and without glows activated. Try it in the game to see how it works. I don't know exactly what you have in mind, but examples are nice.
The whole thing took me only a few minutes. Most of the time was just figuring out what Hue I wanted.
(Edit: Note that these are both 16-bit mode (rlëDs). I did not create any for 8-bit.)
------------------ Moderator- (url="http://"http://www.AmbrosiaSW.com/cgi-bin/ubb/forumdisplay.cgi?action=topics&number;=9&SUBMIT;=Go")EV Developer's Corner(/url) (url="http://"http://www.AmbrosiaSW.com/webboard/Forum9/HTML/003091.html")Need Plug Testers?(/url) | (url="http://"http://www.evula.com/survival_guide/")EV/EVO/EVN Survival Guide(/url) | (url="http://"http://www.AmbrosiaSW.com/games/evn/addons.html")Nova Addons(/url) | (url="http://"http://homepage.mac.com/dr_ralph/")Got NovaTools?(/url) | (url="http://"http://www.ambrosiasw.com/cgi-bin/vftp/dl-redirect.pl/TheChallenge102.sea.bin?path=evn/plugins&file;=TheChallenge102.sea.bin")The Challenge v1.0.2(/url) "Many things are possible. A smaller set of things are likely." -pipeline
(This message has been edited by mrxak (edited 08-30-2002).)
Hues always worked for me. (url="http://"http://homepage.mac.com/arcangel_c/PrismVell.mov")http://homepage.mac....c/PrismVell.mov(/url)
Originally posted by ArcAngel Counterstrike: **Hues always worked for me.http://homepage.mac....c/PrismVell.mov
Freaky.